Chips and cracks in your vinyl windows are not only unsightly, but they will also make your home drafty and can affect your energy bills. If you are wondering how to repair cracked vinyl windows, there are ways that you can repair your vinyl windows without replacing the entire window. If the damage is extensive and you need new vinyl replacement windows in Howard County, MD, EC Roofing can help you.
At EC Roofing, we have helped Maryland residents for over over 30 years with their vinyl windows repair and replacement. Vinyl windows are more energy-efficient, easier to maintain, and can improve the value of your home. If you notice cracks or chips in your windows and want a free estimate on repair or replacement, call 410-455-9880 today to schedule your vinyl window glass repair or replacement.
Deciding Between Repairing or Replacing Your Vinyl Window Glass
Vinyl glass windows have an average lifespan between 20-40 years with proper care and maintenance. If you spot a chip or crack in your vinyl windows, it does not necessarily mean you need to replace the whole window, which can cost hundreds of dollars. Repairing your vinyl window yourself can save you money and be done within a few hours with the right tools.
If you have double-pane windows and the seal in between the panes of glass is worn or damaged, it may be easier to call a professional vinyl window glass repair company to repair your windows.
Tools Necessary for Repairing Cracked Vinyl Windows
Vinyl glass is made out of polyvinyl chloride, or PVC. For small cracks in the frame or window, you can repair them with the right tools. To begin, make sure you have the following tools:
- Utility knife
- Flathead screwdriver
- Double-sided adhesive tape
- Glass sheets
- Composite fasteners
- Paint (optional)
How to Repair Cracked Vinyl Windows
The steps involved in repairing your windows are straightforward:
- Separate the vinyl sash from the window. Each sash will have tabs that you bend in your direction to free it from the frame. Typically, there will be a top and bottom sash. Use the screwdriver to lift part of the sash away from the window so you can pull it away.
- Pull out the stops. At the edge of the glass under the frame that surrounds the sash, find the flat vinyl strips with a small lip. Place the flathead screwdriver beneath the lip and tap the end until the stop slides from the frame.
- Remove the caulk from the window. Use the utility knife to cut through the sash and remove the caulk around the setting blocks. These are at the center of the windows along each side.
- Pull out the existing glass. Slide the utility knife between the windowpane and the outer frame with the sash facing up. As the glass becomes free, be careful not to let the pane drop.
- Set the replacement glass. Cut thin strips of double-sided adhesive tape and place them inside the window frame. Then carefully place the new glass onto the frame.
- Fix the stops and replace the window. Place the setting blocks around the outer edges of the glass to ensure the sash aligns properly. You can place additional setting blocks along all sides to help with the alignment. Snap the stops back into place over the window and inside the window frame.
- With the window frame back in place, sand any rough areas and paint the frame to match the exterior walls.
EC Roofing: For Your, Vinyl Replacement Window Needs in Howard County, MD
There are many reasons why you will need to repair your vinyl windows. Window panes can become loose, foggy, lose their original color, or become damaged after a storm. If you notice damage to your windows, follow these tips on repairing cracked vinyl windows or call EC Roofing today at 410-455-9880 for a free estimate for your vinyl window glass repair or replacement.